亚克力抛光
Vapor Polishing of AcrylicSealing surface leaks from tool feed lines.
Custom designed tool eliminates feed lines. Additional vapor polish operation improves finish.
丙烯酸as machined组件需要卓越的表面光洁度才能成功安装。关键轮廓消除了二次抛光操作的选择。
特殊设计的工具允许10-16微英寸的加工完成。抛光工具清洁零件并增加高光泽。
Clear acrylic machining需要高质量抛光的成品投影仪镜头。铸造亚克力选择其光学清晰度和透光率。
铸亚克力组件
Vapor Polished AcrylicClear Acrylic Covers
塑料制丙烯酸组件
明确丙烯酸光管铸亚克力LED灯管
铸亚克力组件
Flame Polished Acrylic Manifold铸亚克力管汇
医用塑料歧管。
小透明亚克力歧管铸亚克力，抛光
Polished Cast Acrylic Component
火焰抛光亚克力进气口丙烯酸Intake Component, Flame Polished
Vapor Polished Acrylic ManifoldsVarious Acrylic Medical Components, Polished
医疗器械用丙烯酸组件
医疗Polished Acrylic Manifold丙烯酸Polished Manifold for a Medical Application
火焰抛光铸造亚克力镜片Military application requires high degree of consistant finish for light lens
Combination of machined finish with flame polish and buffing
丙烯酸组件，蒸汽抛光
仪表行业用抛光亚克力观察帽
Polished acrylic sight cap
丙烯酸Plastic Component after Polishing亚克力抛光可以提供最好的透明度和透光率的所有透明塑料。在挤压和铸造形式，亚克力容易抛光。根据组件的配置，可以使用四种抛光技术中的任何一种；蒸汽抛光、抛光、火焰抛光和直接机械抛光。亚克力抛光可以提供最好的透明度和透光率的所有透明塑料。在挤压和铸造形式，亚克力容易抛光。根据组件的配置，可以使用四种抛光技术中的任何一种；蒸汽抛光、抛光、火焰抛光和直接机械抛光。
5轴加工塑料歧管
5 Axis machining capabilities allows Connecticut Plastics to shrink lead times and help you get your device to market faster.
丙烯酸Manifold Polished to Optical Quality丙烯酸plastic components, after machining can be polished to optical quality, to allow observation.
亚克力流形制造的5轴加工中心，蒸汽抛光，然后组装黄铜插入。
样品的光学质量ity fluidic manifold, precision machined in acrylic then vapor polished, so that fluid running through channels can be observed. Brass inserts by Connecticut Plastics, an additional service that we offer. Small assemblies.
Vapor Polishing of Acrylic
丙烯酸as machined
Clear acrylic machining
Vapor Polished Acrylic
明确丙烯酸光管
Flame Polished Acrylic Manifold
小透明亚克力歧管
火焰抛光亚克力进气口
Vapor Polished Acrylic Manifolds
医疗Polished Acrylic Manifold
火焰抛光铸造亚克力镜片
丙烯酸组件，蒸汽抛光
丙烯酸Plastic Component after Polishing
丙烯酸Manifold Polished to Optical Quality
抛光亚克力组件是一个非常流行的选择，工程师在考虑光学器件的设计。亚克力以其优异的透光性、透明度和无色性而闻名。不幸的是，亚克力不像聚碳酸酯、聚砜和ultem等其他材料那样容易抛光到光学表面。内表面如螺纹孔很难达到高清晰度。
亚克力抛光可以提供最好的透明度和透光率的所有透明塑料。在挤压和铸造形式，亚克力容易抛光。根据组件的配置，可以使用四种抛光技术中的任何一种；蒸汽抛光、抛光、火焰抛光和直接机械抛光。
蒸汽抛光利用溶剂蒸汽在丙烯酸塑料表面流动。这种方法有利于内部特征，但它对丙烯酸的影响是产生更多的半透明完成。通常情况下，机加工光洁度越高，蒸汽抛光的最终效果越好。零件清洁至关重要。我们很高兴为您的加工丙烯酸塑料零件进行蒸汽抛光；然而，为了达到最佳效果，加工和丙烯酸抛光都应该由康涅狄格塑料公司完成。雷竞技最新app
Buffing of acrylic produces a good finish. Buffing is mostly used on exterior surfaces in larger components. Buffing utilizes a spinning cotton wheel with cutting compound. Being a mechanical process, the wheel leaves microscopic scratches and can leave a haze or uneven clarity on acrylic.
Flame polishing utilizes a hot flame to flow a surface. Much like spray painting, finish quality depends on the operator’s skill level. Done properly, flame polishing can produce some of the clearest finishes.
直接机械塑料抛光利用专用工具直接从机床上产生抛光表面。这种方法虽然技术含量最高，但却能生产出近乎完美的复杂表面轮廓。
丙烯酸polishing requires special skill since acrylic is a stress sensitive material and is fairly brittle. It can surface stress crack or craze due to poor machining or stresses setup from polishing. For the most stable, stress-free component, always specify anannealingcycle after machining, otherwise stress cracking will occur in service.